Renewable energy: Difference between revisions

From Citizendium
Jump to navigation Jump to search
imported>Milton Beychok
m (→‎Political contributions: Mostly added wiki links.)
imported>Milton Beychok
m (→‎Political contributions: Some minor changes for clarity and a bit of shortening. Thanks for providing this section, Howard.)
Line 10: Line 10:
Renewable energy technologies are essential contributors to the energy supply portfolio, as they contribute to world energy security and, reduce dependency on [[fossil fuel]]s, and provide opportunities for mitigating [[greenhouse gas]] emissions (namely [[carbon dioxide]]). The first two of these contributions affect global political and military security.
Renewable energy technologies are essential contributors to the energy supply portfolio, as they contribute to world energy security and, reduce dependency on [[fossil fuel]]s, and provide opportunities for mitigating [[greenhouse gas]] emissions (namely [[carbon dioxide]]). The first two of these contributions affect global political and military security.
===Political contributions===
===Political contributions===
To understand the political effects of energy, a good deal of perspective can come from the unexpected consequences of changes of sources of non-renewable energy, with subsequent consideration of how renewable fuels, or extreme fuel efficiency, can have geopolitical effects.


The first modern [[battleship]]s were fuelled by [[fuel oil|oil]] rather than [[coal]]. This was done for sound engineering reasons, but also would contribute to the role of the [[Middle East]] in world politics. Previously, a nation that wanted to have its warships operate worldwide needed a worldwide network of coaling stations on shore. Taking coal aboard was an exhausting, filthy operation for the crew and local labor, and still required shore security for the coaling stations.  Warships had no effective mechanical aids to moving coal into their furnaces, so their crews required a large number of brawny stokers with shovels. Coal dust was not only dirty but dangerous; coal dust in the air could explode, or break into spontaneous fire.  
The unexpected historical political consequences resulting from changing non-renewable energy sources (i.e., changing from [[coal]] to [[Petroleum crude oil|oil]]) provides a good perspective of how a shift to renewable fuels can have geopolitical effects.


Oil could be transferred from ship to ship by [[pump]]s, and refueling could take place in any port, or later, at sea. Oil could easily be pumped into the furnaces, obviating the need for stokers. Since the main source of oil was the [[Middle East]], however, the needs of the [[Royal Navy]] would dominate [[Great Britain|British]] policy in that region: the source of oil had to be ensured. Jacky Fisher called himself an "oil maniac" as early as 1886, and [[Winston Churchill]] made oil propulsion a matter of national policy in 1911. Only oil could provide speeds of 25 knots or better, and Fisher and Churchill valued speed above armor. To implement this policy, [[Britain]] invested directly in the [[Anglo-Persian Oil Company]], acquiring "51 percent of company stock, placed two directors on its board, and negotiated a secret contract to provide the Admiralty with a 20-year supply of oil under attractive terms."<ref>{{citation
The first modern [[battleship]]s were fuelled by [[fuel oil|oil]] rather than [[coal]]. This was done for sound engineering reasons, but would enhance the role of the [[Middle East]] in world politics. Previously, nations wanting its warships operate worldwide needed a worldwide network of onshore coaling stations. Taking coal aboard was an exhausting operation for the crew and local labor, and required shore security for the coaling stations. Warships had no effective mechanical aids for moving coal into their furnaces, so it required a large number of brawny stokers with shovels. Coal dust was dirty and dangerous; coal dust in the air could explode, or break into spontaneous fire.
 
Oil could be transferred from ship to ship by [[pump]]s, and refueling could take place in any port, or later, at sea. Oil could easily be pumped into the furnaces, obviating the need for stokers. Since the main source of oil was the [[Middle East]], the needs of the [[Royal Navy]] would dominate [[Great Britain|British]] policy in that region because the source of oil had to be ensured. Admiral Sir John (Jacky) Fisher called himself an "oil maniac" as early as 1886, and [[Winston Churchill]] made oil propulsion a matter of national policy in 1911. Only oil could provide speeds of 25 knots or better, and Fisher and Churchill valued speed above armor. To implement this policy, [[Britain]] invested directly in the [[Anglo-Persian Oil Company]] and "acquired 51 percent of company stock, placed two directors on its board, and negotiated a secret contract to provide the Admiralty with a 20-year supply of oil under attractive terms."<ref>{{citation
  | url = http://www.dtic.mil/doctrine/jel/jfq_pubs/1327.pdf
  | url = http://www.dtic.mil/doctrine/jel/jfq_pubs/1327.pdf
  |  journal = Joint Forces Quarterly
  |  journal = Joint Forces Quarterly
Line 23: Line 24:
Ensuring an oil supply, if only for naval forces, became a policy consideration before the [[Second World War]], as at the [[1921 Cairo Conference]] that established the boundaries of modern [[Iraq]], and named a Hashemite king &mdash; the Hashemites being the rivals of the House of Saud controlling [[Saudi Arabia]].
Ensuring an oil supply, if only for naval forces, became a policy consideration before the [[Second World War]], as at the [[1921 Cairo Conference]] that established the boundaries of modern [[Iraq]], and named a Hashemite king &mdash; the Hashemites being the rivals of the House of Saud controlling [[Saudi Arabia]].


The explosive growth of automobile use in the U.S., and then worldwide, only accentuated the significance of oil-rich Middle East nations.  This became especially obvious after Arab nations declared an oil boycott after the [[1973 Arab-Israeli War]].  More and more, Western energy planners thought of electric cars or other oil-independent propulsion. Nuclear propulsion had been seen as attractive for naval vessels, but the costs and sensitivities eventually showed it was suitable only for [[aircraft carrier]]s and [[submarine]]s.
The explosive worldwide growth of automobile only accentuated the significance of oil-rich Middle East nations.  This became especially obvious when [[Arab]] nations declared an oil boycott after the [[1973 Arab-Israeli War]].  More and more, Western energy planners thought of electric cars or other oil-independent propulsion. Nuclear propulsion had been seen as attractive for naval vessels, but the costs eventually showed it was suitable only for [[aircraft carrier]]s and [[submarine]]s.


While there had been electrical blackouts in the [[United States]] as early as 1965, electrical deregulation, and the financial incentive to buy power across a grid not designed for reliable large-scale power sale, made this an issue. While it might not be financially acceptable for electrical utilities to build traditional [[Fossil fuel|fossil-fueled]] plants, cogeneration became more attractive -- if it could be connected to the grid.  Utilities were also more willing to look at fossil-independent generation to protect them from world market variations.
While there had been electrical blackouts in the [[United States]] as early as 1965, electrical deregulation, and the financial incentive to buy power across a grid not designed for reliable large-scale power sale, made this an issue. While it might not be financially acceptable for electrical utilities to build traditional [[Fossil fuel|fossil-fueled]] plants, cogeneration became more attractive -- if it could be connected to the grid.  Utilities were also more willing to look at fossil-independent generation to protect them from world market variations.

Revision as of 15:52, 29 May 2010

This article is developed but not approved.
Main Article
Discussion
Related Articles  [?]
Bibliography  [?]
External Links  [?]
Citable Version  [?]
 
This editable, developed Main Article is subject to a disclaimer.

Renewable energy is derived from natural processes that are regularly replenished. Renewable energy sources and technologies include solar power, wind power, hydropower, geothermal energy, biomass, and biofuels. Each of these has unique characteristics which influence how and where they are used.[1]

About 18% of global final energy consumption comes from renewables, with 13% from traditional biomass (which is mainly used for heating) and 3% from hydroelectric power. The share of renewables in electricity generation is around 18%, with 15% of global electricity coming from hydroelectricity and 3.4% from new renewable energy sources.[2]

According to the International Energy Agency (IEA), renewable energy technologies can play an important role in addressing the challenges of moving towards clean, reliable, secure and competitive energy supply. Many countries have made progress in promoting renewables in their energy mix, but obstacles remain and, says the IEA, greater efforts are needed.[3]

Rationale for renewable energy

Renewable energy technologies are essential contributors to the energy supply portfolio, as they contribute to world energy security and, reduce dependency on fossil fuels, and provide opportunities for mitigating greenhouse gas emissions (namely carbon dioxide). The first two of these contributions affect global political and military security.

Political contributions

The unexpected historical political consequences resulting from changing non-renewable energy sources (i.e., changing from coal to oil) provides a good perspective of how a shift to renewable fuels can have geopolitical effects.

The first modern battleships were fuelled by oil rather than coal. This was done for sound engineering reasons, but would enhance the role of the Middle East in world politics. Previously, nations wanting its warships operate worldwide needed a worldwide network of onshore coaling stations. Taking coal aboard was an exhausting operation for the crew and local labor, and required shore security for the coaling stations. Warships had no effective mechanical aids for moving coal into their furnaces, so it required a large number of brawny stokers with shovels. Coal dust was dirty and dangerous; coal dust in the air could explode, or break into spontaneous fire.

Oil could be transferred from ship to ship by pumps, and refueling could take place in any port, or later, at sea. Oil could easily be pumped into the furnaces, obviating the need for stokers. Since the main source of oil was the Middle East, the needs of the Royal Navy would dominate British policy in that region because the source of oil had to be ensured. Admiral Sir John (Jacky) Fisher called himself an "oil maniac" as early as 1886, and Winston Churchill made oil propulsion a matter of national policy in 1911. Only oil could provide speeds of 25 knots or better, and Fisher and Churchill valued speed above armor. To implement this policy, Britain invested directly in the Anglo-Persian Oil Company and "acquired 51 percent of company stock, placed two directors on its board, and negotiated a secret contract to provide the Admiralty with a 20-year supply of oil under attractive terms."[4]

Ensuring an oil supply, if only for naval forces, became a policy consideration before the Second World War, as at the 1921 Cairo Conference that established the boundaries of modern Iraq, and named a Hashemite king — the Hashemites being the rivals of the House of Saud controlling Saudi Arabia.

The explosive worldwide growth of automobile only accentuated the significance of oil-rich Middle East nations. This became especially obvious when Arab nations declared an oil boycott after the 1973 Arab-Israeli War. More and more, Western energy planners thought of electric cars or other oil-independent propulsion. Nuclear propulsion had been seen as attractive for naval vessels, but the costs eventually showed it was suitable only for aircraft carriers and submarines.

While there had been electrical blackouts in the United States as early as 1965, electrical deregulation, and the financial incentive to buy power across a grid not designed for reliable large-scale power sale, made this an issue. While it might not be financially acceptable for electrical utilities to build traditional fossil-fueled plants, cogeneration became more attractive -- if it could be connected to the grid. Utilities were also more willing to look at fossil-independent generation to protect them from world market variations.

Environmental contributions

The fuels that produce the most emissions of carbon dioxide are fossil fuels and they can be replaced by renewable sources of energy that produce much lower carbon dioxide emissions.

The International Energy Agency estimates that nearly 50% of global electricity supplies will need to come from renewable energy sources in order to halve carbon dioxide emissions by 2050.

Renewable energy development

The term renewable energy covers a number of sources and technologies at different stages of commercialization. The International Energy Agency (IEA) has defined three generations of renewable energy technologies, reaching back over 100 years:

  • First-generation technologies emerged from the industrial revolution at the end of the 19th century and include hydropower, biomass power, and geothermal power and heat. These technologies are quite widely used.[5]
  • Second-generation technologies include solar heating and cooling, wind power, modern forms of bioenergy, and solar photovoltaics. These are now entering markets as a result of research, development and demonstration (RD&D) investments since the 1980s. Initial investment was prompted by energy security concerns linked to the oil crises of the 1970s but the primary appeal of these technologies is due, at least in part, to environmental benefits. Many of the technologies reflect significant advancements in materials of construction.[5]
  • Third-generation technologies are still under development and include advanced biomass gasification, biorefinery technologies, concentrating solar thermal power, hot dry rock (HDR) geothermal power, and ocean energy. Advances in nanotechnology may also play a major role.[5]

First-generation technologies are well established, second-generation technologies are emerging technologies, and third-generation technologies heavily depend on long-term R&D commitments, where the public sector has a role to play.[5]

First-generation technologies

First-generation technologies are widely used in locations with an abundance of the appropriate natural resources. Their future use depends on the exploration of the remaining resource potential, particularly in developing countries, and on overcoming challenges related to the environment and social acceptance.

Biomass

Biomass commonly refers to renewable organic materials such as wood, wood waste, straw, sugar cane, algae, and many other byproducts derived from a variety of agricultural and forestry production as well as other sources. Since biomass is derived from plants which were generated by utilizing solar energy in the photosynthesis process, it can also be defined as the organic material on Earth that has stored solar energy in the chemical bonds of the organic material.

The use of biomass for producing heat and electric power is a fully mature technology which offers a ready disposal mechanism for municipal, agricultural, and industrial organic wastes. However, the use of biomass remained relatively stagnant over the period of 1997 to 2007, even though demand for biomass (mostly wood) continues to grow in many developing countries. One of the problems of biomass is that material directly combusted in cook stoves produces pollutants, leading to health and environmental consequences, although improved cook stove programs are alleviating some of these effects. First-generation biomass technologies can be economically competitive, but may still require gaining public acceptance and overcoming small-scale issues.[5]

Hydroelectricity

(CC) Photo: Eric Sollien
Hydroelectric power Three Gorges Dam on Yangtze river in China

Hydroelectric power plants have the advantage of being long-lived and many existing plants have operated for more than 100 years. Hydropower is also an extremely flexible technology from the perspective of power grid operation. Large hydropower provides one of the lowest cost options in today’s energy market, even compared to fossil fuels and there are no harmful emissions associated with plant operation.[5]

Hydroelectric power is currently the world’s largest installed renewable source of electricity, supplying about 17% of total electricity in 2005.[6] China is the world's largest producer of hydroelectric power in the world, followed by Canada.

However, there are several significant social and environmental disadvantages of large-scale hydroelectric power systems: dislocation of people living where the reservoirs are planned and disruption of aquatic ecosystems and birdlife.[7] Hydroelectric power is now more difficult to site in developed nations because most major sites within these nations are either already being used or may be unavailable for environmental reasons. The areas of greatest hydroelectric growth are the growing economies of Asia. India and China are the development leaders; however, other Asian nations are also expanding hydropower.

There is a strong consensus now that countries should adopt an integrated approach towards managing water resources, which would involve planning hydropower development in co-operation with other water-using sectors.[5]

Geothermal power and heat

(PD) Photo: Gretar Ívarsson
Geothermal power plant in Iceland

Geothermal power plants can operate 24 hours per day, providing baseload capacity. Estimates for the world potential capacity for geothermal power generation vary widely, ranging from 40 GW by 2020 to as much as 6,000 GW.[8][9]

Geothermal power capacity grew from around 1 GW in 1975 to almost 10 GW in 2008.[9] The United States is the world leader in terms of installed capacity, representing 3.1 GW. Other countries with significant installed capacity include the Philippines (1.9 GW), Indonesia (1.2 GW), Mexico (1.0 GW), Italy (0.8 GW), Iceland (0.6 GW), Japan (0.5 GW), and New Zealand (0.5 GW).[9][10] In some countries, geothermal power accounts for a significant share of the total electricity supply, such as in the Philippines, where geothermal represented 17 percent of the total power mix at the end of 2008.[11]

Geothermal ground source heat pumps represented an estimated 30 gigawatts-thermal (GWth) of installed capacity at the end of 2008, with other direct uses of geothermal heat (i.e., for space heating, agricultural drying and other uses) reaching an estimated 15 GWth. As of 2008, at least 76 countries use geothermal energy in some form.

Second-generation technologies

Markets for second-generation technologies have been strong and growing over the past decade, and these technologies have gone from being a passion for the dedicated few to a major economic sector in countries such as Germany, Spain, the United States, and Japan. Many large industrial companies and financial institutions are involved and the challenge is to broaden the market base for continued growth worldwide.[5]

Solar Heating

Solar heating systems are a well known second-generation technology and generally consist of solar thermal collectors, a fluid system to move the heat from the collector to its point of usage, and a reservoir or tank for heat storage. The systems may be used to heat domestic hot water, swimming pools, or homes and businesses. The heat can also be used for industrial process applications or as an energy input for other uses such as solar assisted air conditioning.[12]

In many warmer climates, a solar heating system can provide a very high percentage (50 to 75%) of domestic hot water energy. As of 2009, China has 27 million rooftop solar water heaters.[13]

Solar thermal power stations

(PD) Drawing: Milton Beychok
Schematic flow diagram of the SEGS solar power plants

Solar thermal power stations include the 354 MW Solar Energy Generating Systems power complex in the USA, Nevada Solar One (USA, 64 MW), Andasol 1 (Spain, 50 MW) and the PS10 solar power tower (Spain, 11 MW). Many other plants are under construction or planned, mainly in Spain and the USA.[2] In developing countries, three World Bank projects for integrated solar thermal and combined cycle gas turbine power plants in Egypt, Mexico, and Morocco have been approved.[14]

(PD) Photo: National Oceanic and Atmospheric Administration
Parabolic trough mirrors in solar power plants
(PD) Photo: Sandia National Laboratory
Fields of parabolic trough mirrors at the SEGS solar power plants in the Mojave Desert

Photovoltaics

Photovoltaic (PV) cells, also called solar cells, convert light into electricity. In the 1980s and early 1990s, most photovoltaic modules were used to provide small, stand-alone power systems in areas with no electricity distribution system. However, from around 1995, industry efforts have focused increasingly on developing building-integrated photovoltaics and photovoltaic power plants for grid-connected applications.

As of October 2009, the largest photovoltaic (PV) power plants in the world are the Olmedilla Photovoltaic Park (Spain, 60 MW), the Puertollano Photovoltaic Park (Spain, 50 MW), the Moura Photovoltaic Power Plant (Portugal, 46 MW), and the Waldpolenz Solar Park (Germany, 40 MW).[15] The largest photovoltaic power plant in North America is the 25 MW DeSoto Next Generation Solar Energy Center in Florida. The plant consists of over 90,000 solar panels.[16]

At the end of 2008, the cumulative global PV installations reached 15,200 MW.[14] Photovoltaic production has been doubling every two years, increasing by an average of 48 percent each year since 2002, making it the world’s fastest-growing energy technology. The top five photovoltaic producing countries are Japan, China, Germany, Taiwan, and the United States.[17]

Wind power

(CC) Photo: Natalie Meister
Wind farm turbines in San Gorgonio Pass, Southern California

Some of the second-generation renewables, such as wind power, have high potential and have already realized relatively low production costs.[18][19] At the end of 2009, worldwide wind power plant capacity was 157,900 MW, representing an increase of 31 percent during the year,[20] and wind power supplied some 1.3% of global electricity consumption.[21] Wind power is widely used in European countries, and more recently in the United States and in Asia.[22][23] Wind power accounts for approximately 19% of electricity generation in Denmark, 11% in Spain and Portugal, and 9% in the Republic of Ireland.[24] These are some of the largest "wind farms" in the world, as of January 2010:

Wind farm Installed
capacity
(MW)
Country
Capricorn Ridge Wind Farm 662 United States
Fowler Ridge Wind Farm 750 United States
Horse Hollow Wind Energy Center 736 United States
Roscoe Wind Farm 781 United States
San Gorgonio Pass Wind Farm 619 United States
Tehachapi Pass Wind Farm 690 United States

Modern forms of bioenergy

For more information, see: Gasoline.

Global ethanol (C2H5OH) production for transport fuel tripled between 2000 and 2007 from 17 billion to more than 52 billion litres, while biodiesel expanded more than ten-fold from less than 1 billion to almost 11 billion litres. Biofuels provide 1.8% of the world’s transport fuel and recent estimates indicate a continued high growth. The main producing countries for transport biofuels are the United States, Brazil, and the European Union.[25]

The growing ethanol and biodiesel industries are providing jobs in plant construction, operations, and maintenance, mostly in rural communities. According to the Renewable Fuels Association, the ethanol industry created almost 154,000 U.S. jobs in 2005 alone, boosting household income by $5.7 billion. It also contributed about $3.5 billion in tax revenues at the local, state, and federal levels.[26]

Ethanol

Brazil has one of the largest renewable energy programs in the world, involving production of ethanol fuel from sugar cane, and ethanol now provides 18 percent of the country's automotive fuel. As a result of this and the exploitation of domestic deep water oil sources, Brazil, which for years had to import a large share of the petroleum needed for domestic consumption, recently reached complete self-sufficiency in liquid fuels.[27][28]

Most cars on the road today in the United States can run on blends of up to 10% ethanol, and motor vehicle manufacturers already produce vehicles designed to run on much higher ethanol blends. Ford, DaimlerChrysler, and General Motors are among the automobile companies that sell flexible-fuel cars, trucks, and minivans that can use gasoline and ethanol blends ranging containing up to 85% ethanol (E85). By mid-2006, there were approximately six million E85-compatible vehicles on U.S. roads. The challenge is to expand the market for biofuels beyond the farm states where they have been most popular. Flexible-fuel vehicles are assisting in this transition because they allow drivers to choose different fuels based on price and availability. The Energy Policy Act of 2005, which calls for 7.5 billion gallons of biofuels to be used annually by 2012, will also help to expand the market.[26]

Biodiesel

For more information, see: Biodiesel.

Existing diesel engines often can use, without modification, up to 20% biodiesel blends. Other engines can use 100% biodiesel.

Biodiesel is biodegradable, while petroleum diesel is not. Emissions from biodiesel are said to have less environmental impact.

Third-generation technologies

Third-generation renewable energy technologies are still under development and include advanced biomass gasification, biorefinery technologies, hot-dry-rock geothermal power, and ocean energy. Third-generation technologies are not yet widely demonstrated or have limited commercialization. Many are on the horizon and may have potential comparable to other renewable energy technologies, but still depend on attracting sufficient attention and RD&D funding.[5]

New bioenergy technologies

According to the International Energy Agency, cellulosic ethanol biorefineries could allow biofuels to play a much bigger role in the future than organizations such as the IEA previously thought. Cellulosic ethanol can be made from plant matter composed primarily of inedible cellulose fibers that form the stems and branches of most plants. Crop residues (such as corn stalks, wheat straw and rice straw), wood waste, and municipal solid waste are potential sources of cellulosic biomass. Dedicated energy crops, such as switchgrass, are also promising cellulose sources that can be sustainably produced in many regions of the United States.

Selected Commercial Cellulosic Ethanol Plants
in the United States
(Operational or under construction)[29]
Company Location Feedstock
Abengoa Bioenergy Hugoton, KS Wheat straw
BlueFire Ethanol Irvine, CA Multiple sources
Gulf Coast Energy Mossy Head, FL Wood waste
Mascoma Lansing, MI Wood
POET LLC Emmetsburg, IA Corn cobs
Range Fuels[30] Treutlen County, GA Wood waste
SunOptal Little Falls, MN Wood chips
Xethanol Auburndale, FL Citrus peels

Ocean energy

First proposed more than thirty years ago, systems to harvest utility-scale electrical power from ocean waves (referred to as wave farms) have recently been gaining momentum as a viable technology. The potential for this technology is considered promising, especially on west-facing coasts with latitudes between 40 and 60 degrees.[31]

In the United Kingdom, for example, the Carbon Trust recently estimated the extent of the economically viable offshore resource at 55 TWh per year, about 14% of current national demand. Across Europe, the technologically achievable resource has been estimated to be at least 280 TWh per year.[31] In 2003, the Electric Power Research Institute (EPRI) estimated the viable resource in the United States at 255 TWh per year (6% of demand).

Funding for a wave farm in Scotland was announced in February 2007 by the Scottish Executive, at a cost of over 4 million pounds, as part of a £13 million funding packages for ocean power in Scotland. The farm will be the world's largest with a capacity of 3 MW.[32]

The world's first commercial tidal power station was installed in 2007 in the narrows of Strangford Lough in Northern Ireland. The 1.2 megawatt underwater tidal electricity generator, part of Northern Ireland's Environment & Renewable Energy Fund program, takes advantage of the fast tidal flow (up to 4 metres per second) in the lough. Although the generator is powerful enough to power a thousand homes, the turbine has minimal environmental impact, as it is almost entirely submerged, and the rotors pose no danger to wildlife as they turn quite slowly.[33]

Enhanced geothermal systems

As of 2008, geothermal power development was under way in more than 40 countries, partially attributable to the development of new technologies, such as Enhanced Geothermal Systems (EGS).[14][The development of binary cycle power plants and improvements in drilling and extraction technology may enable enhanced geothermal systems over a much greater geographical range than "traditional" geothermal systems. Demonstration EGS projects are operational in the United States, Australia, Germany, France, and The United Kingdom.[34]

Nanotechnology thin-film solar panels

Solar power panels that use nanotechnology, which can create circuits out of individual silicon molecules, may cost half as much as traditional photovoltaic cells, according to executives and investors involved in developing the products. The Nanosolar company, in San Jose, California, has secured more than $100 million from investors to build a factory for nanotechnology thin-film solar panels. The company expects the factory to open in 2010 and produce enough solar cells each year to generate 430 megawatts of power.

Recent growth of renewables

From the end of 2004 to the end of 2008, solar photovoltaic (PV) capacity increased sixfold to more than 16 gigawatts (GW), wind power capacity increased 250 percent to 121 GW, and total power capacity from new renewables increased 75 percent to 280 GW. During the same period, solar heating capacity doubled to 145 gigawatts-thermal (GWth), while biodiesel production increased sixfold to 12 billion liters per year and ethanol production doubled to 67 billion liters per year.[14]

Selected renewable energy indicators[14][35][36]
Selected global indicators 2004 2005 2006 2007 2008
Annual investment in new renewable capacity 30 38 63 104 120 billion USD
Existing renewables power capacity,
including large-scale hydro
895 930 1,020 1,070 1,140 GWe
Existing renewables power capacity,
excluding large hydro
160 182 207 240 280 GWe
Wind power capacity (existing) 48 59 74 94 121 GWe
Biomass heating ~250 GWth
Solar hot water/ Space heating 77 88 105 126 145 GWth
Geothermal heating ~50 GWth
Ethanol production (annual) 30.5 33 39 50 67 billion liters
Number of countries with policy targets for
renewable energy use
45 49 66 73

Annual percentage growth for 2008 was significant. Wind power grew by 29 percent and grid-connected solar PV by 70 percent. The capacity of utility-scale solar PV plants (larger than 200 kilowatts) tripled during 2008, to 3 GW. Solar hot water grew by 15 percent, and annual ethanol and biodiesel production both grew by 34 percent. Heat and power from biomass and geothermal sources continued to grow, and small hydroelectric power sources increased by about 8 percent.[14]

In 2008, for the first time, more renewable energy than conventional power capacity was added in both the European Union and United States, demonstrating a "fundamental transition" of the world's energy markets towards renewables, according to a report released by REN21, a global renewable energy policy network based in Paris.[35]

References

  1. Renewable energy... into the mainstream From the IEA website
  2. 2.0 2.1 Renewables 2007 Global Status Report From website of the Renewable Energy Policy Network for the 21st Century (REN21)
  3. Deploying Renewables From the IEA website
  4. Erik Dahl (Winter 2000-2001), "Naval Innovation: from Coal to Oil", Joint Forces Quarterly
  5. 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 Renewables in global energy supply: An IEA facts sheet From the IEA website.
  6. Review of Solutions to Global Warming, Air Pollution, and Energy Security Mark Z. Jacobson (2009). From the website of the Stanford University in Stanford, California
  7. Hydroelectric power's dirty secret revealed From the website of New Scientist, 24 February 2005.
  8. "What is Geothermal Potential?", IGA News. From the website of the International Geothermal Association.
  9. 9.0 9.1 9.2 The possible role and contribution of geothermal energy to the mitigation of climate change From Proceedings of IPCC Scoping Meeting on Renewable Energy Sources, Luebeck, Germany, 20-25 January 2008, p. 59-80.
  10. U.S. Geothermal Energy Market Report 2009 From website of the Islandsbanki, Iceland
  11. Philippines targets $2.5 billion geothermal development, Leonora Walet, Reuters, November 5, 2009.
  12. Solar assisted air-conditioning of buildings From the IEA website.
  13. Lester R. Brown (2009). Plan B 4.0: Mobilizing to Save Civilization (Earth Policy Institute), 1st Edition. W.W. Norton Company, p.122. ISBN 0-393-07103-0.  Full copy available online here
  14. 14.0 14.1 14.2 14.3 14.4 14.5 Renewables Global Status Report: 2009 Update From website of the Renewable Energy Network for the 21st Century (REN21)
  15. World's largest photovoltaic power From website of Photovoltaic Resources.com
  16. FPL Commissions DeSoto Next Generation Solar Energy Center Energy Online, October 28, 2009.
  17. Solar Cell Production Jumps 50 Percent in 2007 From the website of the Earth Policy Institute.
  18. "Stabilizing Climate" (PDF) A chapter in: Lester R. Brown (2006). Plan B 2.0: Rescuing a Planet Under Stress and a Civilization in Trouble, 1st Edition. W.W. Norton Company, p. 122. ISBN 0-393-06162-0. 
  19. The Clean Tech Revolution... the costs of clean energy are declining
  20. Gains in Global Wind Capacity Reported From the website of The New York Times, May 27, 2010
  21. Wind turbines generate more than 1 % of the global electricity February 2008. From the website of the World Wind Energy Association (WWEA)
  22. Global wind energy markets continue to boom – 2006 another record year. From the website of the Global Wind Energy Council (GWEC)
  23. Global Wind 2008 Report From the website of the Global Wind Energy Council (GWEC)
  24. IEA Wind Energy: Annual Report 2008 From the website of the IEA
  25. Assessing Biofuels (2009) From the website of the United Nations Environment Programme
  26. 26.0 26.1 American energy: The renewable path to energy security (2006) From the website of the Worldwatch Institute Center for American Progress
  27. America and Brazil Intersect on Ethanol (May 15, 2006) From the website of RenewableEnergyWorld.com
  28. New Rig Brings Brazil Oil Self-Sufficiency (April 21, 2006) From the website of The Washington Post
  29. U.S. Cellulosic Ethanol Plants, New or Under Construction
  30. Range Fuels receives $80 million loan
  31. 31.0 31.1 Jeff Scruggs and Paul Jacob. Harvesting Ocean Wave Energy, Science, Vol. 323, p. 1176, 27 February 2009.
  32. Orkney to get 'biggest' wave farm BBC News, 20 February 2007.
  33. World tidal energy first for NI, BBC News BBC News, 7 June 2007.
  34. Bertani, Ruggero (2009), Geothermal Energy: An Overview on Resources and Potential From Proceedings of the International Conference on National Development of Geothermal Energy Use, Slovakia
  35. 35.0 35.1 Renewables Global Status Report 2009 Update From the website of RenewableEnergyWorld.com
  36. Renewables Global Status Report: 2006 Update From website of the Renewable Energy Network for the 21st Century (REN21)