User:John R. Brews/Images: Difference between revisions

From Citizendium
Jump to navigation Jump to search
imported>John R. Brews
imported>John R. Brews
Line 64: Line 64:
|Voltage Follower Small-signal.PNG|Small-signal circuit for voltage follower.
|Voltage Follower Small-signal.PNG|Small-signal circuit for voltage follower.
|Voltage follower output resistance.PNG|Determination of the small-signal output resistance.
|Voltage follower output resistance.PNG|Determination of the small-signal output resistance.
|Bipolar hybrid-pi model.PNG| Simplified, low-frequency hybrid-pi [[BJT]] model.
|Bipolar hybrid-pi capacitances.PNG|Bipolar hybrid-pi model with parasitic capacitances.
}}
}}



Revision as of 16:12, 22 May 2011

Angle brackets: & #x27E8; = ⟨   & #x27E9; = ⟩   & #10216; = ⟨   & #10217;= ⟩ <Φ|Ψ> <Φ|Ψ> <Φ|Ψ> ⟨Φ|Ψ⟩ ⟨Φ|Ψ⟩ ⟨Φ|Ψ⟩ Φ|Ψ

Photos

Photos
Mourning dove on nest in Tucson
(PD) Photo: John R. Brews
Mourning dove on nest in Tucson
Morning dove with squab, Tucson AZ.
(PD) Photo: John R. Brews
Morning dove with squab, Tucson AZ.
Mourning dove with squab.
(PD) Photo: John R. Brews
Mourning dove with squab.
Mourning dove squab.
(PD) Photo: John R. Brews
Mourning dove squab.
Mourning dove on saguaro cactus, Tucson AZ.
(PD) Image: John R. Brews
Mourning dove on saguaro cactus, Tucson AZ.

Magnetism

Magnetism
B-field lines near uniformly magnetized sphere
(CC) Image: John R. Brews
B-field lines near uniformly magnetized sphere
Magnetic flux density vs. magnetic field in steel and iron
(CC) Image: John R. Brews
Magnetic flux density vs. magnetic field in steel and iron
B-field from current I2 in wire 2 causes force F on wire 1.
(PD) Image: John R. Brews
B-field from current I2 in wire 2 causes force F on wire 1.

Chemistry

Chemistry
Reactants cross an energy barrier, enter an intermediate state and finally emerge in a lower energy configuration.
(PD) Image: John R. Brews
Reactants cross an energy barrier, enter an intermediate state and finally emerge in a lower energy configuration.

Circuits

Widlar current source
Widlar current source using bipolar transistors
(CC) Image: John R. Brews
Widlar current source using bipolar transistors
Small-signal circuit for finding output resistance of the Widlar source
(CC) Image: John R. Brews
Small-signal circuit for finding output resistance of the Widlar source
Design trade-off between output resistance and output current in Widlar source
(CC) Image: John R. Brews
Design trade-off between output resistance and output current in Widlar source
A current mirror implemented with npn bipolar transistors using a resistor to set the reference current IREF; VCC = supply voltage.
(PD) Image: John R. Brews
A current mirror implemented with npn bipolar transistors using a resistor to set the reference current IREF; VCC = supply voltage.
An n-channel MOSFET current mirror with a resistor to set the reference current
(PD) Image: John R. Brews
An n-channel MOSFET current mirror with a resistor to set the reference current
Gain-boosted current mirror with op amp feedback to increase output resistance.
(PD) Image: John R. Brews
Gain-boosted current mirror with op amp feedback to increase output resistance.
MOSFET version of wide-swing current mirror; M1 and M2 are in active mode
(PD) Image: John R. Brews
MOSFET version of wide-swing current mirror; M1 and M2 are in active mode
Operational-amplifier based current sink. Because the op amp is modeled as a nullor, op amp input variables are zero regardless of the values for its output variables.
(PD) Image: John R. Brews
Operational-amplifier based current sink. Because the op amp is modeled as a nullor, op amp input variables are zero regardless of the values for its output variables.
Two-port network with symbol definitions.
(PD) Image: John R. Brews
Two-port network with symbol definitions.
Z-equivalent two port showing independent variables I1 and I2.
(PD) Image: John R. Brews
Z-equivalent two port showing independent variables I1 and I2.
Y-equivalent two port showing independent variables
(PD) Image: John R. Brews
Y-equivalent two port showing independent variables
H-equivalent two-port showing independent variables
(PD) Image: John R. Brews
H-equivalent two-port showing independent variables
G-equivalent two-port showing independent variables
(PD) Image: John R. Brews
G-equivalent two-port showing independent variables
Bipolar current mirror with emitter resistors
(PD) Image: John R. Brews
Bipolar current mirror with emitter resistors
Small-signal circuit for bipolar current mirror
(PD) Image: John R. Brews
Small-signal circuit for bipolar current mirror
Common base circuit with active load and current drive.
(PD) Image: John R. Brews
Common base circuit with active load and current drive.
Common-base amplifier with AC current source I1 as signal input
(PD) Image: John R. Brews
Common-base amplifier with AC current source I1 as signal input
Bipolar transistor with base grounded and signal applied to emitter.
(PD) Image: John R. Brews
Bipolar transistor with base grounded and signal applied to emitter.
Common-base amplifier with AC voltage source V1 as signal input
(PD) Image: John R. Brews
Common-base amplifier with AC voltage source V1 as signal input
The result of applying Norton's theorem.
(PD) Image: John R. Brews
The result of applying Norton's theorem.
Bipolar current buffer.
(PD) Image: John R. Brews
Bipolar current buffer.
Small-signal circuit to find output current.
(PD) Image: John R. Brews
Small-signal circuit to find output current.
Small-signal circuit with test current iX to find Norton resistance.
(PD) Image: John R. Brews
Small-signal circuit with test current iX to find Norton resistance.
The result of applying Thévenin's theorem.
(PD) Image: John R. Brews
The result of applying Thévenin's theorem.
Bipolar buffer.
(PD) Image: John R. Brews
Bipolar buffer.
Small-signal circuit for voltage follower.
(PD) Image: John R, Brews
Small-signal circuit for voltage follower.
Determination of the small-signal output resistance.
(PD) Image: John R. Brews
Determination of the small-signal output resistance.
Simplified, low-frequency hybrid-pi BJT model.
(PD) Image: John R. Brews
Simplified, low-frequency hybrid-pi BJT model.
Bipolar hybrid-pi model with parasitic capacitances.
(PD) Image: John R. Brews
Bipolar hybrid-pi model with parasitic capacitances.


Math

Math & logic
Venn diagrams; set A is the blue circle (left) and its interior, set B is the red circle (right) and its interior.
(PD) Image: John R. Brews
Venn diagrams; set A is the blue circle (left) and its interior, set B is the red circle (right) and its interior.

Forces

Forces
Force and its equivalent force and couple
(CC) Image: John R. Brews
Force and its equivalent force and couple
Centripetal force FC upon an object held in circular motion by a string of length R. The string is under tension FT, as shown separately to the left.
(PD) Image: John R. Brews
Centripetal force FC upon an object held in circular motion by a string of length R. The string is under tension FT, as shown separately to the left.
Upper panel: Ball on a banked circular track moving with constant speed v; Lower panel: Forces on the ball.
(PD) Image: John R. Brews
Upper panel: Ball on a banked circular track moving with constant speed v; Lower panel: Forces on the ball.
Polar unit vectors at two times t and t + dt for a particle with trajectory r ( t ); on the left the unit vectors uρ and uθ at the two times are moved so their tails all meet, and are shown to trace an arc of a unit radius circle.
(PD) Image: John R. Brews
Polar unit vectors at two times t and t + dt for a particle with trajectory r ( t ); on the left the unit vectors uρ and uθ at the two times are moved so their tails all meet, and are shown to trace an arc of a unit radius circle.
Local coordinate system for planar motion on a curve.
(PD) Image: John R. Brews
Local coordinate system for planar motion on a curve.
Exploded view of rotating spheres in an inertial frame of reference showing the centripetal forces on the spheres provided by the tension in a rope tying them together.
(PD) Image: John R. Brews
Exploded view of rotating spheres in an inertial frame of reference showing the centripetal forces on the spheres provided by the tension in a rope tying them together.
Rotating spheres subject to centrifugal (outward) force in a co-rotating frame in addition to the (inward) tension from the rope.
(PD) Image: John R. Brews
Rotating spheres subject to centrifugal (outward) force in a co-rotating frame in addition to the (inward) tension from the rope.
The "whirling table". The rod is made to rotate about the axis and (from the bead's viewpoint) the centrifugal force acting on the sliding bead is balanced by the weight attached by a cord over two pulleys.
(PD) Image: John R. Brews
The "whirling table". The rod is made to rotate about the axis and (from the bead's viewpoint) the centrifugal force acting on the sliding bead is balanced by the weight attached by a cord over two pulleys.
Force diagram for an element of water surface in co-rotating frame.
(PD) Image: John R. Brews
Force diagram for an element of water surface in co-rotating frame.
An object located at xA in inertial frame A is located at location xB in accelerating frame B.
(PD) Image: John R. Brews
An object located at xA in inertial frame A is located at location xB in accelerating frame B.
An orbiting but fixed orientation coordinate system B, shown at three different times.
(PD) Image: John R. Brews
An orbiting but fixed orientation coordinate system B, shown at three different times.
An orbiting coordinate system B in which unit vectors uj, j = 1, 2, 3 rotate to face the rotational axis.
(PD) Image: John R. Brews
An orbiting coordinate system B in which unit vectors uj, j = 1, 2, 3 rotate to face the rotational axis.
Crossing a rotating carousel walking at constant speed, a spiral is traced out in the inertial frame, while a simple straight radial path is seen in the frame of the carousel.
Crossing a rotating carousel walking at constant speed, a spiral is traced out in the inertial frame, while a simple straight radial path is seen in the frame of the carousel.
Rotating shaft unbalanced by two identical attached weights. Image
(PD) Image: John R. Brews
Rotating shaft unbalanced by two identical attached weights. Image
Torque vector T representing a force couple.
(PD) Image: John R. Brews
Torque vector T representing a force couple.
An ellipsoid showing its axes
(PD) Image: John R. Brews
An ellipsoid showing its axes
While the pendulum P swings in a fixed plane about its hanger at H, the planes of the Earth observer rotate.
(PD) Image: John R. Brews
While the pendulum P swings in a fixed plane about its hanger at H, the planes of the Earth observer rotate.
As time progresses each unit vector's change is orthogonal to it.
(PD) Image: John R. Brews
As time progresses each unit vector's change is orthogonal to it.
Tossed ball on carousel. At the center of the carousel, the path is a straight line for a stationary observer, and is an arc for a rotating observer.
(PD) Image: John R. Brews
Tossed ball on carousel. At the center of the carousel, the path is a straight line for a stationary observer, and is an arc for a rotating observer.
From the center of curvature of the path, the ball executes approximate circular motion.
(PD) Image: John R. Brews
From the center of curvature of the path, the ball executes approximate circular motion.
Some useful notation for the ball toss on a carousel.
(PD) Image: John R. Brews
Some useful notation for the ball toss on a carousel.
The ball follows a nearly circular path about the center of curvature.
(PD) Image: John R. Brews
The ball follows a nearly circular path about the center of curvature.
The inertial forces on the ball combine to provide the resultant centripetal force required by Newton's laws for circular motion.
(PD) Image: John R. Brews
The inertial forces on the ball combine to provide the resultant centripetal force required by Newton's laws for circular motion.
Stats for a particular path of ball toss.
(PD) Image: John R. Brews
Stats for a particular path of ball toss.
Tangent-plane coordinate system on rotating Earth at latitude φ.
(PD) Image: John R. Brews
Tangent-plane coordinate system on rotating Earth at latitude φ.
Wind motion in direction of pressure gradient is deflected by the Coriolis force.
(PD) Image: John R. Brews
Wind motion in direction of pressure gradient is deflected by the Coriolis force.
In the northern hemisphere, Coriolis force forms a counterclockwise flow.
(PD) Image: John R. Brews
In the northern hemisphere, Coriolis force forms a counterclockwise flow.
Path of ball for four rates of rotation. Catcher positioned so the catch is made at 12 o'clock in all cases.
(PD) Image: John R. Brews
Path of ball for four rates of rotation. Catcher positioned so the catch is made at 12 o'clock in all cases.
A fluid forced through a rocking tube experiences a Coriolis acceleration.
(PD) Image: John R. Brews
A fluid forced through a rocking tube experiences a Coriolis acceleration.

Electromagnetism

Electromagnetism
Electric motor using a current loop in a magnetic flux density, labeled B
(CC) Image: John R. Brews
Electric motor using a current loop in a magnetic flux density, labeled B
The Fizeau apparatus for measuring the speed of light by passing it between the cogs of a rotating gear and reflecting it back through adjacent cogs.
(PD) Image: John R. Brews
The Fizeau apparatus for measuring the speed of light by passing it between the cogs of a rotating gear and reflecting it back through adjacent cogs.
Measuring a length using interference fringes.
(PD) Image: John R. Brews
Measuring a length using interference fringes.
The wavelengths of standing waves in a box that have zero amplitude (nodes) at the walls.
(PD) Image: John R. Brews
The wavelengths of standing waves in a box that have zero amplitude (nodes) at the walls.
Measuring a length in wavelengths of light using a Michelson interferometer.
(PD) Image: John R. Brews
Measuring a length in wavelengths of light using a Michelson interferometer.
Boat opposing incoming waves experiences the Doppler effect
(PD) Image: John R. Brews
Boat opposing incoming waves experiences the Doppler effect
Doppler shift with moving source
(PD) Image: John R. Brews
Doppler shift with moving source
Infinitesimal current elements in two closed current-carrying loops
(PD) Image: John R. Brews
Infinitesimal current elements in two closed current-carrying loops
Origin at 0, observation point at P, and present position of charge q distant by R from observation point P.
(PD) Image: John R. Brews
Origin at 0, observation point at P, and present position of charge q distant by R from observation point P.

Devices

Devices
Cross section of MOS capacitor showing charge layers
(PD) Image: John R. Brews
Cross section of MOS capacitor showing charge layers
Three types of MOS capacitance vs. voltage curves. VTH = threshold, VFB = flatbands 
(PD) Image: John R. Brews
Three types of MOS capacitance vs. voltage curves. VTH = threshold, VFB = flatbands 
Small-signal equivalent circuit of the MOS capacitor in inversion with a single trap level
(PD) Image: John R. Brews
Small-signal equivalent circuit of the MOS capacitor in inversion with a single trap level
A modern MOSFET
(PD) Image: John R. Brews
A modern MOSFET
A power MOSFET; source and body share a contact.
(PD) Image: John R. Brews
A power MOSFET; source and body share a contact.
Calculated density of states for crystalline silicon.
(CC) Image: John R. Brews
Calculated density of states for crystalline silicon.
Field effect: At a gate voltage above threshold a surface inversion layer of electrons forms at a semiconductor surface.
(CC) Image: John R. Brews
Field effect: At a gate voltage above threshold a surface inversion layer of electrons forms at a semiconductor surface.
Occupancy comparison between n-type, intrinsic and p-type semiconductors.
(PD) Image: John R. Brews
Occupancy comparison between n-type, intrinsic and p-type semiconductors.
Nonideal pn-diode current-voltage characteristics
(PD) Image: John R. Brews
Nonideal pn-diode current-voltage characteristics
Band-bending diagram for pn-junction diode at zero applied voltage
(PD) Image: John R. Brews
Band-bending diagram for pn-junction diode at zero applied voltage
Band-bending for pn-diode in reverse bias
(PD) Image: John R. Brews
Band-bending for pn-diode in reverse bias
Quasi-Fermi levels in reverse-biased pn-junction diode
(PD) Image: John R. Brews
Quasi-Fermi levels in reverse-biased pn-junction diode
Band-bending diagram for pn-diode in forward bias
(PD) Image: John R. Brews
Band-bending diagram for pn-diode in forward bias
Fermi occupancy function vs. energy departure from Fermi level in volts for three temperatures
(PD) Image: John R. Brews
Fermi occupancy function vs. energy departure from Fermi level in volts for three temperatures
Fermi surface in k-space for a nearly filled band in the face-centered cubic lattice
(PD) Image: John R. Brews
Fermi surface in k-space for a nearly filled band in the face-centered cubic lattice
A constant energy surface in the silicon conduction band consists of six ellipsoids.
(PD) Image: John R. Brews
A constant energy surface in the silicon conduction band consists of six ellipsoids.
Planar Schottky diode with n+-guard rings and tapered oxide.
(PD) Image: John R. Brews
Planar Schottky diode with n+-guard rings and tapered oxide.
Comparison of Schottky and pn-diode current voltage curves.
(PD) Image: John R. Brews
Comparison of Schottky and pn-diode current voltage curves.
Schottky barrier formation on p-type semiconductor. Energies are in eV.
(PD) Image: John R. Brews
Schottky barrier formation on p-type semiconductor. Energies are in eV.
Schottky diode under forward bias VF.
(PD) Image: John R. Brews
Schottky diode under forward bias VF.
Schottky diode under reverse bias VR.
(PD) Image: John R. Brews
Schottky diode under reverse bias VR.
Critical electric field for breakdown versus bandgap energy in several materials.
(PD) Image: John R. Brews
Critical electric field for breakdown versus bandgap energy in several materials.
Schottky barrier height vs. metal electronegativity for some selected metals on n-type silicon.
(PD) Image: John R. Brews
Schottky barrier height vs. metal electronegativity for some selected metals on n-type silicon.
Theoretical dependence of Schottky barrier heights for diodes using p-SiC vs. electronegativity of the metal according to Mönch
Theoretical dependence of Schottky barrier heights for diodes using p-SiC vs. electronegativity of the metal according to Mönch

Vestibular system

Vestibular system
When the semicircular canal stops rotating, inertia causes the cupula to register a false rotation in the opposite sense.
When the semicircular canal stops rotating, inertia causes the cupula to register a false rotation in the opposite sense.
Top: The semicircular canals with head erect. Bottom: the canals with head tipped forward.
Top: The semicircular canals with head erect. Bottom: the canals with head tipped forward.