BTX: Difference between revisions

From Citizendium
Jump to navigation Jump to search
imported>Milton Beychok
m (Replaced article text (which got lost somehow))
imported>Milton Beychok
m (Removed extraneous line space)
Line 63: Line 63:


{{Image|BTX Derivatives.png|center|680px|Diagram of the chain of petrochemicals derived from the BTX aromatics.}}  
{{Image|BTX Derivatives.png|center|680px|Diagram of the chain of petrochemicals derived from the BTX aromatics.}}  


==References==
==References==
<references/>
<references/>

Revision as of 11:24, 18 March 2012

This article is developing and not approved.
Main Article
Discussion
Related Articles  [?]
Bibliography  [?]
External Links  [?]
Citable Version  [?]
 
This editable Main Article is under development and subject to a disclaimer.
(CC) Diagram: Milton Beychok
Structural diagrams of the BTX aromatic hydrocarbons.

In the petroleum and petrochemical industries, the acronym BTX refers to mixtures of the aromatic hydrocarbons benzene, toluene, and the three xylene isomers. The xylene isomers are distinguished by the designations ortho – or o –, meta – or m –, and para – or p – as indicated in the adjacent diagram. If ethylbenzene is included, the mixture is sometimes referred to as BTEX.

The BTX aromatics are very important petrochemical materials. Global consumption of benzene, estimated at more than 40,000,000 tons in 2010, showed an unprecedented growth of more than 3,000,000 tons from the level seen in 2009. Likewise, the para-xylene consumption showed unprecedented growth in 2010, growing by 2,800,000 tons, a full ten percent growth from 2009.[1]

Toluene is also a valuable petrochemical for use as a solvent and intermediate in chemical manufacturing processes and as a high octane gasoline component.[2][3][4][5]

Properties of the BTX hydrocarbons

The table below lists some of the properties of the BTX aromatic hydrocarbons, all of which are liquids at typical room conditions:

Properties[6]
  benzene toluene ethylbenzene p - xylene m - xylene o - xylene
Molecular formula C6H6 C7H8 C8H10 C8H10 C8H10 C8H10
Molecular mass, g · mol –1 78.12 92.15 106.17 106.17 106.17 106.17
Boiling point, °C 80.1 110.6 136.2 138.4 139.1 144.4
Melting point, °C 5.5 – 95.0 – 95.0 13.3 – 47.9 – 25.2

Production of BTX hydrocarbons

BTX content of Pyrolysis Gasoline and Reformate[4]
  Pyrolysis Reformate
Standard
severity
Medium
severity
CCR SR
BTX content, wt % 58 42 51 42
Benzene, wt % of BTX 48 44 17 14
Toluene, wt % of BTX 33 31 39 39
Xylenes, wt % of BTX 19 25 44 47
CCR = Continuous catalytic regenerative reformer
SR = Semi-regenerative catalytic reformer

Benzene, toluene, and xylenes can be made by various processes. However, most BTX production is based on the recovery of aromatics derived from the catalytic reforming of naphtha in a petroleum refinery.[4][7]

Catalytic reforming usually utilizes a feedstock naphtha that contains non-aromatic hydrocarbons with 6 to 11 or 12 carbon atoms and typically produces a reformate product containing C6 to C8 aromatics (benzene, toluene, xylenes) as well as paraffins and heavier aromatics containing 9 to 11 or 12 carbon atoms.

Another process for producing BTX aromatics involves the steam cracking of hydrocarbons which typically produces a cracked naphtha product commonly referred to as pyrolysis gasoline, pyrolysis gas or pygas. The pyrolysis gasoline typically consists of C6 to C8 aromatics, heavier aromatics containing 9 to 11 or 12 carbon atoms, and non-aromatic cyclic hydrocarbons (naphthenes) containing 6 or more carbon atoms.[4][7]

The adjacent table compares the BTX content of pyrolysis gasoline produced at standard cracking severity or at medium cracking severity with the BTX content of catalytic reformate produced by a either a continuous catalytic regenerative (CCR) reformer or by a semi-regenerative catalytic reformer. About 70 percent of the global production of benzene is by extraction from either reformate or pyrolysis gasoline.[4]

The BTX aromatics can be extracted from catalytic reformate or from pyrolysis gasoline by many different methods. Most of those methods, but not all, involve the use of a solvent either for liquid-liquid extraction or extractive distillation. Many different solvents are suitable, including sulfolane (C4H8O2S), furfural (C5H4O2), tetraethylene glycol (C8H18O5), dimethylsulfoxide (C2H6OS), and N-methyl-2-pyrrolidone (C5H9NO).

Below is a schematic flow diagram of one method, involving extractive distillation, for extraction of the BTX aromatics from a catalytic reformate:[2]

(CC) Diagram: Milton Beychok
Schematic flow diagram for the extraction of BTX aromatics from a catalytic reformate.

Petrochemicals produced from BTX

There are a very large number of petrochemicals produced from the BTX aromatics. The following diagram shows the chains leading from the BTX components to some of the petrochemicals that can be produced from those components:[2]

(CC) Diagram: Milton Beychok
Diagram of the chain of petrochemicals derived from the BTX aromatics.

References

  1. The Future of Benzene and Para-Xylene after Unprecedented Growth In 2010. From a ChemSystems report in 2011.
  2. 2.0 2.1 2.2 The BTX Chain: Benzene, Toluene, Xylene. Chapter 4 of the DOE's Office of Energy Efficiency and Renewable Energy (EERE) report entitled "Energy and Environmental Profile of the U.S. Chemical Industry" of May 2000.
  3. Use of Process Analytics in Aromatics (BTX and phenol) production plants. Case Study, August 2008. (scroll down to "Aromatics" section.
  4. 4.0 4.1 4.2 4.3 4.4 Benzene/Toluene. Introduction to a ChemSystems report, 2009.
  5. 10.6 Aromatics, Online Italian Encyclopedia of Hydrocarbons, Istituto della Enciclopedia Italiana, Volume II, 2006, pages 603-605.
  6. Robert C. Weast (Editor) (1975). Handbook of Chemistry and Physics, 56th Edition. CRC Press. ISBN 0-87819-455-X. 
  7. 7.0 7.1 International Energy Agency (2006).Energy Technology Perspectives. 1st Edition. Organisation for Economic Co-operation and Development (OECD). Page 414. ISBN 08070-1556-3.