Glomerular filtration rate

From Citizendium
Revision as of 17:09, 8 January 2008 by imported>Robert Badgett
Jump to navigation Jump to search

Glomerular filtration rate (GFR) is the volume of fluid filtered from the renal glomerular capillaries into the Bowman's capsule per unit time.[1] Clinically, this is often measured to determine renal function.

Measurement

There are several different techniques used to calculate or estimate the glomerular filtration rate (GFR or eGFR).

Measurement using inulin

The GFR can be determined by injecting inulin (not insulin) into the plasma. Since inulin is neither reabsorbed nor secreted by the kidney after glomerular filtration, its rate of excretion is directly proportional to the rate of filtration of water and solutes across the glomerular filter.

Estimation using creatinine clearance

In clinical practice, however, creatinine clearance is used to measure GFR. Creatinine is an endogenous molecule, synthesized in the body, which is freely filtered by the glomerulus (but also secreted by the renal tubules in very small amounts). Creatinine clearance is therefore a close approximation of the GFR. However, the approximation of the GFR calculation is best measured by the evaluation and visualization of the frequency and duration of urination. The GFR is typically recorded in units of volume per time, e.g. milliliters per minute (ml/min).

Example: A person has a plasma creatinine concentration of 0.01 mg/ml and in 1 hour he excretes 75 mg of creatinine in the urine. The GFR is calculated as M/P (where M is the mass of creatinine excreted per unit time and P is the plasma concentration of creatinine).

Estimation using Cockcroft-Gault formula

The Cockcroft-Gault formula may be used to calculate an Estimated Creatinine Clearance.[2]

The Estimated Creatinine Clearance then estimates GFR:[3]

Modification of Diet in Renal Disease (MDRD) formula

The most commonly used formula is the "4-variable MDRD" which estimates GFR using four variables - serum creatinine, age, race, and gender:[4]

The original MDRD used six variables with the additional variables being the blood urea nitrogen and albumin levels:[3]

The equations have been validated in patients with chronic kidney disease; however both versions underestimate the GFR in healthy patients with GFRs over 60 mL/min.[5][6] The equations have not been validated in acute renal failure.

Calculation using Starling equation

It is also theoretically possible to calculate GFR using the Starling equation.[7]

The equation is used both in a general sense for all capillary flow, and in a specific sense for the glomerulus:

General usage Glomerular usage Meaning of variable Relationship to GFR Description
Pc Pgc Capillary hydrostatic pressure Direct Increased by dilation of afferent arteriole or constriction of efferent arteriole
Pi Pbs Interstitial hydrostatic pressure Inverse
πc πgc Capillary oncotic pressure Inverse Decreased by nephrotic syndrome
πi πbs Interstitial oncotic pressure Direct
Kf Kf Filtration coefficient Direct Increased by inflammation
σ σ Reflection coefficient Inverse
Jv GFR net filtration n/a

Note that is the net driving force, and therefore the net filtration is proportional to the net driving force.

In practice, it is not possible to identify the needed values for this equation, but the equation is still useful for understanding the factors which affect GFR, and providing a theoretical underpinning for the above calculations.

Normal ranges

The normal ranges of GFR, adjusted for body surface area, are:[8]


Reference Table for Population Mean eGFRs
Age (Years) Mean eGFR[8]
20-29 116 mL/min/1.73 m2
30-39 107 mL/min/1.73 m2
40-49 99 mL/min/1.73 m2
50-59 93 mL/min/1.73 m2
60-69 85 mL/min/1.73 m2
70+ 75 mL/min/1.73 m2


GFR can increase due to hypoproteinemia because of the reduction in plasma oncotic pressure. GFR can also increase due to constriction of the efferent arteriole but decreases due to constriction of the afferent arteriole.

See also

References

  1. Template:GeorgiaPhysiology - "Glomerular Filtration Rate"
  2. GFR Calculator at cato.at - Cockcroft-Gault - GFR calculation (Cockcroft-Gault formula)
  3. 3.0 3.1 Levey AS, Bosch JP, Lewis JB, Greene T, Rogers N, Roth D (1999). "A more accurate method to estimate glomerular filtration rate from serum creatinine: a new prediction equation. Modification of Diet in Renal Disease Study Group". Ann. Intern. Med. 130 (6): 461–70. PMID 10075613[e]
  4. (2002) "K/DOQI clinical practice guidelines for chronic kidney disease: evaluation, classification, and stratification". Am. J. Kidney Dis. 39 (2 Suppl 1): S1–266. PMID 11904577[e]
  5. Rule AD, Larson TS, Bergstralh EJ, Slezak JM, Jacobsen SJ, Cosio FG (2004). "Using serum creatinine to estimate glomerular filtration rate: accuracy in good health and in chronic kidney disease". Ann. Intern. Med. 141 (12): 929–37. PMID 15611490[e]
  6. Levey AS, Coresh J, Greene T, et al (2006). "Using standardized serum creatinine values in the modification of diet in renal disease study equation for estimating glomerular filtration rate". Ann. Intern. Med. 145 (4): 247–54. PMID 16908915[e]
  7. Template:GeorgiaPhysiology - "Forces Driving the Glomerular Filtration Rate":
  8. 8.0 8.1 Anonymous. GFR Frequently Asked Questions - NKDEP. National Kidney Disease Education Program. Retrieved on 2008-01-08.

External links