User:John R. Brews/Images

From Citizendium
< User:John R. Brews
Revision as of 07:13, 20 June 2011 by imported>John R. Brews (→‎Devices)
Jump to navigation Jump to search

Angle brackets: & #x27E8; = ⟨   & #x27E9; = ⟩   & #10216; = ⟨   & #10217;= ⟩ <Φ|Ψ> <Φ|Ψ> <Φ|Ψ> ⟨Φ|Ψ⟩ ⟨Φ|Ψ⟩ ⟨Φ|Ψ⟩ Φ|Ψ

Photos

Photos
Mourning dove on nest in Tucson
(PD) Photo: John R. Brews
Mourning dove on nest in Tucson
Morning dove with squab, Tucson AZ.
(PD) Photo: John R. Brews
Morning dove with squab, Tucson AZ.
Mourning dove with squab.
(PD) Photo: John R. Brews
Mourning dove with squab.
Mourning dove squab.
(PD) Photo: John R. Brews
Mourning dove squab.
Mourning dove on saguaro cactus, Tucson AZ.
(PD) Image: John R. Brews
Mourning dove on saguaro cactus, Tucson AZ.

Magnetism

Magnetism
B-field lines near uniformly magnetized sphere
(CC) Image: John R. Brews
B-field lines near uniformly magnetized sphere
Magnetic flux density vs. magnetic field in steel and iron
(CC) Image: John R. Brews
Magnetic flux density vs. magnetic field in steel and iron
B-field from current I2 in wire 2 causes force F on wire 1.
(PD) Image: John R. Brews
B-field from current I2 in wire 2 causes force F on wire 1.

Chemistry

Chemistry
Reactants cross an energy barrier, enter an intermediate state and finally emerge in a lower energy configuration.
(PD) Image: John R. Brews
Reactants cross an energy barrier, enter an intermediate state and finally emerge in a lower energy configuration.

Circuits

Current sources
Widlar current source using bipolar transistors
(CC) Image: John R. Brews
Widlar current source using bipolar transistors
Small-signal circuit for finding output resistance of the Widlar source
(CC) Image: John R. Brews
Small-signal circuit for finding output resistance of the Widlar source
Design trade-off between output resistance and output current in Widlar source
(CC) Image: John R. Brews
Design trade-off between output resistance and output current in Widlar source
A current mirror implemented with npn bipolar transistors using a resistor to set the reference current IREF; VCC = supply voltage.
(PD) Image: John R. Brews
A current mirror implemented with npn bipolar transistors using a resistor to set the reference current IREF; VCC = supply voltage.
An n-channel MOSFET current mirror with a resistor to set the reference current
(PD) Image: John R. Brews
An n-channel MOSFET current mirror with a resistor to set the reference current
Gain-boosted current mirror with op amp feedback to increase output resistance.
(PD) Image: John R. Brews
Gain-boosted current mirror with op amp feedback to increase output resistance.
MOSFET version of wide-swing current mirror; M1 and M2 are in active mode
(PD) Image: John R. Brews
MOSFET version of wide-swing current mirror; M1 and M2 are in active mode
Operational-amplifier based current sink. Because the op amp is modeled as a nullor, op amp input variables are zero regardless of the values for its output variables.
(PD) Image: John R. Brews
Operational-amplifier based current sink. Because the op amp is modeled as a nullor, op amp input variables are zero regardless of the values for its output variables.
A digital inverter circuit using a bipolar transistor.
(PD) Image: John R. Brews
A digital inverter circuit using a bipolar transistor.
Two-port network with symbol definitions.
(PD) Image: John R. Brews
Two-port network with symbol definitions.
Z-equivalent two port showing independent variables I1 and I2.
(PD) Image: John R. Brews
Z-equivalent two port showing independent variables I1 and I2.
Y-equivalent two port showing independent variables
(PD) Image: John R. Brews
Y-equivalent two port showing independent variables
H-equivalent two-port showing independent variables
(PD) Image: John R. Brews
H-equivalent two-port showing independent variables
G-equivalent two-port showing independent variables
(PD) Image: John R. Brews
G-equivalent two-port showing independent variables
Small-signal circuits
Small-signal circuit for pn-diode driven by a current signal represented as a Norton source.
(PD) Image: John R. Brews
Small-signal circuit for pn-diode driven by a current signal represented as a Norton source.
Bipolar current mirror with emitter resistors
(PD) Image: John R. Brews
Bipolar current mirror with emitter resistors
Small-signal circuit for bipolar current mirror
(PD) Image: John R. Brews
Small-signal circuit for bipolar current mirror
Common base circuit with active load and current drive.
(PD) Image: John R. Brews
Common base circuit with active load and current drive.
Common-base amplifier with AC current source I1 as signal input
(PD) Image: John R. Brews
Common-base amplifier with AC current source I1 as signal input
Bipolar transistor with base grounded and signal applied to emitter.
(PD) Image: John R. Brews
Bipolar transistor with base grounded and signal applied to emitter.
Common-base amplifier with AC voltage source V1 as signal input
(PD) Image: John R. Brews
Common-base amplifier with AC voltage source V1 as signal input
The result of applying Norton's theorem.
(PD) Image: John R. Brews
The result of applying Norton's theorem.
Bipolar current buffer.
(PD) Image: John R. Brews
Bipolar current buffer.
Small-signal circuit to find output current.
(PD) Image: John R. Brews
Small-signal circuit to find output current.
Small-signal circuit with test current iX to find Norton resistance.
(PD) Image: John R. Brews
Small-signal circuit with test current iX to find Norton resistance.
The result of applying Thévenin's theorem.
(PD) Image: John R. Brews
The result of applying Thévenin's theorem.
Bipolar buffer.
(PD) Image: John R. Brews
Bipolar buffer.
Small-signal circuit for voltage follower.
(PD) Image: John R, Brews
Small-signal circuit for voltage follower.
Determination of the small-signal output resistance.
(PD) Image: John R. Brews
Determination of the small-signal output resistance.
Simplified, low-frequency hybrid-pi BJT model.
(PD) Image: John R. Brews
Simplified, low-frequency hybrid-pi BJT model.
Bipolar hybrid-pi model with parasitic capacitances.
(PD) Image: John R. Brews
Bipolar hybrid-pi model with parasitic capacitances.
Simplified, low-frequency hybrid-pi BJT model.
(PD) Image: John R. Brews
Simplified, low-frequency hybrid-pi BJT model.
Bipolar hybrid-pi model with parasitic capacitances.
(PD) Image: John R. Brews
Bipolar hybrid-pi model with parasitic capacitances.
Simplified, three-terminal MOSFET hybrid-pi model.
(PD) Image: John R. Brews
Simplified, three-terminal MOSFET hybrid-pi model.
Four-terminal small-signal MOSFET circuit.
(PD) Image: John R. Brews
Four-terminal small-signal MOSFET circuit.
Miller effect: These two circuits are equivalent.
(PD) Image: John R. Brews
Miller effect: These two circuits are equivalent.
Amplifiers
Some terms used to describe step response in time domain.
(PD) Image: John R. Brews
Some terms used to describe step response in time domain.
Ideal negative feedback model; open loop gain is AOL and feedback factor is β.
(PD) Image: John R. Brews
Ideal negative feedback model; open loop gain is AOL and feedback factor is β.
Conjugate pole locations for step response of two-pole feedback amplifier.
(PD) Image: John R. Brews
Conjugate pole locations for step response of two-pole feedback amplifier.
Step-response of a linear two-pole feedback amplifier.
(PD) Image: John R. Brews
Step-response of a linear two-pole feedback amplifier.
Step response for three values of time constant ratio.
(PD) Image: John R. Brews
Step response for three values of time constant ratio.
Bode gain plot to find phase margin of two-pole amplifier.
(PD) Image: John R. Brews
Bode gain plot to find phase margin of two-pole amplifier.
The Bode plot for a first-order (one-pole) highpass filter
(PD) Image: John R. Brews
The Bode plot for a first-order (one-pole) highpass filter
The Bode plot for a first-order (one-pole) lowpass filter
(PD) Image: John R. Brews
The Bode plot for a first-order (one-pole) lowpass filter
Bode magnitude plot for zero and for low-pass pole
(PD) Image: John R. Brews
Bode magnitude plot for zero and for low-pass pole
Bode phase plot for zero and for low-pass pole
(PD) Image: John R. Brews
Bode phase plot for zero and for low-pass pole
Bode magnitude plot for pole-zero combination; the location of the zero is ten times higher than in above figures
(PD) Image: John R. Brews
Bode magnitude plot for pole-zero combination; the location of the zero is ten times higher than in above figures
Bode phase plot for pole-zero combination; the location of the zero is ten times higher than in above figures
(PD) Image: John R. Brews
Bode phase plot for pole-zero combination; the location of the zero is ten times higher than in above figures
Gain of feedback amplifier AFB in dB and corresponding open-loop amplifier AOL.
(PD) Image: John R. Brews
Gain of feedback amplifier AFB in dB and corresponding open-loop amplifier AOL.
Phase of feedback amplifier °AFB in degrees and corresponding open-loop amplifier °AOL.
(PD) Image: John R. Brews
Phase of feedback amplifier °AFB in degrees and corresponding open-loop amplifier °AOL.
Gain of feedback amplifier AFB in dB and corresponding open-loop amplifier AOL.
(PD) Image: John R. Brews
Gain of feedback amplifier AFB in dB and corresponding open-loop amplifier AOL.
Phase of feedback amplifier AFB in degrees and corresponding open-loop amplifier AOL.
(PD) Image: John R. Brews
Phase of feedback amplifier AFB in degrees and corresponding open-loop amplifier AOL.
Operational amplifier with compensation capacitor CC between input and output to cause pole splitting.
(PD) Image: John R. Brews
Operational amplifier with compensation capacitor CC between input and output to cause pole splitting.
Operational amplifier with compensation capacitor transformed using Miller's theorem to replace the compensation capacitor with a Miller capacitor at the input and a frequency-dependent current source at the output.
(PD) Image: John R. Brews
Operational amplifier with compensation capacitor transformed using Miller's theorem to replace the compensation capacitor with a Miller capacitor at the input and a frequency-dependent current source at the output.
Idealized Bode plot for a two pole amplifier design.
(PD) Image: John R. Brews
Idealized Bode plot for a two pole amplifier design.
Miller capacitance at low frequencies CM (top) and compensation capacitor CC (bottom) as a function of gain
(PD) Image: John R. Brews
Miller capacitance at low frequencies CM (top) and compensation capacitor CC (bottom) as a function of gain

Math

Math & logic
Venn diagrams; set A is the blue circle (left) and its interior, set B is the red circle (right) and its interior.
(PD) Image: John R. Brews
Venn diagrams; set A is the blue circle (left) and its interior, set B is the red circle (right) and its interior.

Forces

Forces
Force and its equivalent force and couple
(CC) Image: John R. Brews
Force and its equivalent force and couple
Centripetal force FC upon an object held in circular motion by a string of length R. The string is under tension FT, as shown separately to the left.
(PD) Image: John R. Brews
Centripetal force FC upon an object held in circular motion by a string of length R. The string is under tension FT, as shown separately to the left.
Upper panel: Ball on a banked circular track moving with constant speed v; Lower panel: Forces on the ball.
(PD) Image: John R. Brews
Upper panel: Ball on a banked circular track moving with constant speed v; Lower panel: Forces on the ball.
Polar unit vectors at two times t and t + dt for a particle with trajectory r ( t ); on the left the unit vectors uρ and uθ at the two times are moved so their tails all meet, and are shown to trace an arc of a unit radius circle.
(PD) Image: John R. Brews
Polar unit vectors at two times t and t + dt for a particle with trajectory r ( t ); on the left the unit vectors uρ and uθ at the two times are moved so their tails all meet, and are shown to trace an arc of a unit radius circle.
Local coordinate system for planar motion on a curve.
(PD) Image: John R. Brews
Local coordinate system for planar motion on a curve.
Exploded view of rotating spheres in an inertial frame of reference showing the centripetal forces on the spheres provided by the tension in a rope tying them together.
(PD) Image: John R. Brews
Exploded view of rotating spheres in an inertial frame of reference showing the centripetal forces on the spheres provided by the tension in a rope tying them together.
Rotating spheres subject to centrifugal (outward) force in a co-rotating frame in addition to the (inward) tension from the rope.
(PD) Image: John R. Brews
Rotating spheres subject to centrifugal (outward) force in a co-rotating frame in addition to the (inward) tension from the rope.
The "whirling table". The rod is made to rotate about the axis and (from the bead's viewpoint) the centrifugal force acting on the sliding bead is balanced by the weight attached by a cord over two pulleys.
(PD) Image: John R. Brews
The "whirling table". The rod is made to rotate about the axis and (from the bead's viewpoint) the centrifugal force acting on the sliding bead is balanced by the weight attached by a cord over two pulleys.
Force diagram for an element of water surface in co-rotating frame.
(PD) Image: John R. Brews
Force diagram for an element of water surface in co-rotating frame.
An object located at xA in inertial frame A is located at location xB in accelerating frame B.
(PD) Image: John R. Brews
An object located at xA in inertial frame A is located at location xB in accelerating frame B.
An orbiting but fixed orientation coordinate system B, shown at three different times.
(PD) Image: John R. Brews
An orbiting but fixed orientation coordinate system B, shown at three different times.
An orbiting coordinate system B in which unit vectors uj, j = 1, 2, 3 rotate to face the rotational axis.
(PD) Image: John R. Brews
An orbiting coordinate system B in which unit vectors uj, j = 1, 2, 3 rotate to face the rotational axis.
Crossing a rotating carousel walking at constant speed, a spiral is traced out in the inertial frame, while a simple straight radial path is seen in the frame of the carousel.
Crossing a rotating carousel walking at constant speed, a spiral is traced out in the inertial frame, while a simple straight radial path is seen in the frame of the carousel.
Rotating shaft unbalanced by two identical attached weights. Image
(PD) Image: John R. Brews
Rotating shaft unbalanced by two identical attached weights. Image
Torque vector T representing a force couple.
(PD) Image: John R. Brews
Torque vector T representing a force couple.
An ellipsoid showing its axes
(PD) Image: John R. Brews
An ellipsoid showing its axes
While the pendulum P swings in a fixed plane about its hanger at H, the planes of the Earth observer rotate.
(PD) Image: John R. Brews
While the pendulum P swings in a fixed plane about its hanger at H, the planes of the Earth observer rotate.
As time progresses each unit vector's change is orthogonal to it.
(PD) Image: John R. Brews
As time progresses each unit vector's change is orthogonal to it.
Tossed ball on carousel. At the center of the carousel, the path is a straight line for a stationary observer, and is an arc for a rotating observer.
(PD) Image: John R. Brews
Tossed ball on carousel. At the center of the carousel, the path is a straight line for a stationary observer, and is an arc for a rotating observer.
From the center of curvature of the path, the ball executes approximate circular motion.
(PD) Image: John R. Brews
From the center of curvature of the path, the ball executes approximate circular motion.
Some useful notation for the ball toss on a carousel.
(PD) Image: John R. Brews
Some useful notation for the ball toss on a carousel.
The ball follows a nearly circular path about the center of curvature.
(PD) Image: John R. Brews
The ball follows a nearly circular path about the center of curvature.
The inertial forces on the ball combine to provide the resultant centripetal force required by Newton's laws for circular motion.
(PD) Image: John R. Brews
The inertial forces on the ball combine to provide the resultant centripetal force required by Newton's laws for circular motion.
Stats for a particular path of ball toss.
(PD) Image: John R. Brews
Stats for a particular path of ball toss.
Tangent-plane coordinate system on rotating Earth at latitude φ.
(PD) Image: John R. Brews
Tangent-plane coordinate system on rotating Earth at latitude φ.
Wind motion in direction of pressure gradient is deflected by the Coriolis force.
(PD) Image: John R. Brews
Wind motion in direction of pressure gradient is deflected by the Coriolis force.
In the northern hemisphere, Coriolis force forms a counterclockwise flow.
(PD) Image: John R. Brews
In the northern hemisphere, Coriolis force forms a counterclockwise flow.
Path of ball for four rates of rotation. Catcher positioned so the catch is made at 12 o'clock in all cases.
(PD) Image: John R. Brews
Path of ball for four rates of rotation. Catcher positioned so the catch is made at 12 o'clock in all cases.
A fluid forced through a rocking tube experiences a Coriolis acceleration.
(PD) Image: John R. Brews
A fluid forced through a rocking tube experiences a Coriolis acceleration.

Electromagnetism

Electromagnetism
Electric motor using a current loop in a magnetic flux density, labeled B
(CC) Image: John R. Brews
Electric motor using a current loop in a magnetic flux density, labeled B
The Fizeau apparatus for measuring the speed of light by passing it between the cogs of a rotating gear and reflecting it back through adjacent cogs.
(PD) Image: John R. Brews
The Fizeau apparatus for measuring the speed of light by passing it between the cogs of a rotating gear and reflecting it back through adjacent cogs.
Measuring a length using interference fringes.
(PD) Image: John R. Brews
Measuring a length using interference fringes.
The wavelengths of standing waves in a box that have zero amplitude (nodes) at the walls.
(PD) Image: John R. Brews
The wavelengths of standing waves in a box that have zero amplitude (nodes) at the walls.
Measuring a length in wavelengths of light using a Michelson interferometer.
(PD) Image: John R. Brews
Measuring a length in wavelengths of light using a Michelson interferometer.
Boat opposing incoming waves experiences the Doppler effect
(PD) Image: John R. Brews
Boat opposing incoming waves experiences the Doppler effect
Doppler shift with moving source
(PD) Image: John R. Brews
Doppler shift with moving source
Infinitesimal current elements in two closed current-carrying loops
Infinitesimal current elements in two closed current-carrying loops
Origin at 0, observation point at P, and present position of charge q distant by R from observation point P.
Origin at 0, observation point at P, and present position of charge q distant by R from observation point P.

Devices

Devices
Mesa diode structure (top) and planar diode structure with guard-ring (bottom).
Mesa diode structure (top) and planar diode structure with guard-ring (bottom).
A planar bipolar junction transistor as might be constructed in a integrated circuit.
A planar bipolar junction transistor as might be constructed in a integrated circuit.
Gummel plot and current gain for a GaAs/AlGaAs heterostructure bipolar transistor.
Gummel plot and current gain for a GaAs/AlGaAs heterostructure bipolar transistor.
Quasi-Fermi levels and carrier densities in forward biased pn-diode.
Quasi-Fermi levels and carrier densities in forward biased pn-diode.
Cross section of MOS capacitor showing charge layers
Cross section of MOS capacitor showing charge layers
Three types of MOS capacitance vs. voltage curves. VTH = threshold, VFB = flatbands 
Three types of MOS capacitance vs. voltage curves. VTH = threshold, VFB = flatbands 
Small-signal equivalent circuit of the MOS capacitor in inversion with a single trap level
Small-signal equivalent circuit of the MOS capacitor in inversion with a single trap level
A modern MOSFET
A modern MOSFET
A power MOSFET; source and body share a contact.
A power MOSFET; source and body share a contact.
Two bipolar transistor modes, showing extrapolation of asymptotes to the Early voltage.
Two bipolar transistor modes, showing extrapolation of asymptotes to the Early voltage.
Channel length modulation in 3/4μm technology.
Channel length modulation in 3/4μm technology.
Early voltage for MOSFETs from a 0.18μm process as a function of channel strength.
Early voltage for MOSFETs from a 0.18μm process as a function of channel strength.
Calculated density of states for crystalline silicon.
Calculated density of states for crystalline silicon.
Field effect: At a gate voltage above threshold a surface inversion layer of electrons forms at a semiconductor surface.
Field effect: At a gate voltage above threshold a surface inversion layer of electrons forms at a semiconductor surface.
Occupancy comparison between n-type, intrinsic and p-type semiconductors.
Occupancy comparison between n-type, intrinsic and p-type semiconductors.
Nonideal pn-diode current-voltage characteristics
Nonideal pn-diode current-voltage characteristics
Band-bending diagram for pn-junction diode at zero applied voltage
Band-bending diagram for pn-junction diode at zero applied voltage
Band-bending for pn-diode in reverse bias
Band-bending for pn-diode in reverse bias
Quasi-Fermi levels in reverse-biased pn-junction diode
Quasi-Fermi levels in reverse-biased pn-junction diode
Band-bending diagram for pn-diode in forward bias
Band-bending diagram for pn-diode in forward bias
Fermi occupancy function vs. energy departure from Fermi level in volts for three temperatures
Fermi occupancy function vs. energy departure from Fermi level in volts for three temperatures
Fermi surface in k-space for a nearly filled band in the face-centered cubic lattice
Fermi surface in k-space for a nearly filled band in the face-centered cubic lattice
A constant energy surface in the silicon conduction band consists of six ellipsoids.
A constant energy surface in the silicon conduction band consists of six ellipsoids.
Planar Schottky diode with n+-guard rings and tapered oxide.
Planar Schottky diode with n+-guard rings and tapered oxide.
Comparison of Schottky and pn-diode current voltage curves.
Comparison of Schottky and pn-diode current voltage curves.
Schottky barrier formation on p-type semiconductor. Energies are in eV.
Schottky barrier formation on p-type semiconductor. Energies are in eV.
Schottky diode under forward bias VF.
Schottky diode under forward bias VF.
Schottky diode under reverse bias VR.
Schottky diode under reverse bias VR.
Critical electric field for breakdown versus bandgap energy in several materials.
Critical electric field for breakdown versus bandgap energy in several materials.
Schottky barrier height vs. metal electronegativity for some selected metals on n-type silicon.
Schottky barrier height vs. metal electronegativity for some selected metals on n-type silicon.
The maximum number of images is 30! Please add another gallery !

Vestibular system

Vestibular system
When the semicircular canal stops rotating, inertia causes the cupula to register a false rotation in the opposite sense.
When the semicircular canal stops rotating, inertia causes the cupula to register a false rotation in the opposite sense.
Top: The semicircular canals with head erect. Bottom: the canals with head tipped forward.
Top: The semicircular canals with head erect. Bottom: the canals with head tipped forward.