Power function

From Citizendium
Jump to navigation Jump to search
This article is developing and not approved.
Main Article
Discussion
Related Articles  [?]
Bibliography  [?]
External Links  [?]
Citable Version  [?]
 
This editable Main Article is under development and subject to a disclaimer.
This article is about Power function. For other uses of the term Power, please see Power (disambiguation).
Fig.1. versus for various

Power function (Степенная функция) is one of the primary elementary functions;

(1)

where is parameter; often it is assumed that is real.

Notations

In C++, can be expressed as . In some realizations, there may be some problems while one of arguments are integer and another is complex. In some programming languages, including Mathematica, Maple, Matlab aln Latex (in the "math.mode"), the same can be written as z^a.

There is description of the Power function on Wolfram MathWorld.[1]

Often, the function is considered with 2 parameters, including the leading coefficient into definition of function [2]. For several real values , the graphic is shown in figure 1.

In some cases of integer the function has specific names.

For , the power function is cubic function.

For , the power function is quadratic function.

For , the power function , referring to the identity function.

For , the power function refers to constant.

For , the power function and the power function is its own inverse function. For this case, often is called "inverse function" (without to indicate, for which function it is "inverse"); using such a term in a context, where the inversion of function takes place, may cause confusions.

The confusion may appear also at the use of the superscript after the name of a function to indicate that after to evaluate the function, the power function should be applied to the result. Often this appears dealing with trigonometric functions, one writes, for example, instead of . In particular, at , this writing may refer also to the ArcSin function. Such a confusion happens at the use of the Mathematica operation TeXForm: expressions are automatically replaced to , mimicking the th iteration of function . In TORI, the upper superscript after the function indicates its iteration.

Properties of the power function

the following expressions hold in the wide ranges of values of parameters :

However, the use for negative and complex values of parameters may cause errors. For integer value of power , the expression can be simplified as follows

and so on.

Derivative

The derivative of a power function can be derived from the properties of exp and ln:

Such an expression is valid in wide range of parameters.

Integral

Form the expression for the derivative, the integration of the power function also can be derived:

Such an expression is also valid in wide range of parameters, and, especially, while .

Iterates of power function

Fig.2. Iterates of quadratic function, for various

The th Iterate of power function can be expressed again through the power function in the following way:

(2)

with . This corresponds to the school–level rules

(3)

(4)

however, such a rules should be used carefully, because for come complex values of , and the relations (3) and (4) are not valid. Since year 2005, the Mathematica software recognizes this trouble and the Simplify and FullSimplify operations do not use substitutions (3) and (4) automatically before to get some additional information about values of the parameters involved.

The interesting property of iteration of the Power function is that

(5)

For this reason, the expression

(7)

can be interpreted in a way in the left hand side of (5) as well as the expression in the right hand side of (5) in wide range of values of parameters and the argument. (Assuming the same for other functions may lead to confusions.) For $a\!=\!2$, iterates of the quadratic function are shown in Figure 2.

The power function is one of few functions, for which the iterates can be expressed in so simple way. For other function , the th iterate can be expressed through its superfunction and the Abel function ,

(8)

However, for , the expression (8) is also valid; the corresponding superfunction and the Abel function are

(9)

(10)

Another often confusion is related with the order of operations, while is interpreted as , while the more usual interpretation is . in particular, the Gaussian exponential is never interpreted as . In order to avoid confusions, the use of parenthesis is strongly recommended; also, the representation through exponential and logarithm is appropriate.

Use of the power function

Initially, the power function could be used for short writing of expressions with polynomials with numbers. However, after discovery of exponential and logarithm, by default, is interpreted as ; the power function can be applied to objects of any sets, where operations and are already defined. Even if some of these operations are not yet defined, for natural number can be considered as just iteration of function "multiplication to " applied to unity times.

In such a way the power function is interpreted in quantum mechanics; for example, refers to iterative application of operator to the state .

This article is adapted from TORI [3]

References

  1. Weisstein, Eric W. (6 November 2013). Power. MathWorld. Wolfram Research. Retrieved on 11 November 2013.
  2. http://www.wmueller.com/precalculus/families/1_41.html
  3. http://tori.ils.uec.ac.jp/TORI/index.php/Power_function